Tilt a Vehicle.
Tilt a Vehicle.
I / We may have noticed how the vehicles move and follow the ground contours, well this we can use to our advantage.
We can do this with the ground going up or going down.
Make the hole big enough ie: L x W x D (H, if going up) for the type of vehicle your going to use.
I would put the road lines/markings in first so you know where to position your vehicle.
OK the vehicle's positioned in the hole, now you can level the ground,
If the angle is not correct you will have to re-adjust the ground & the vehicle.
Do not
Don't try to move the vehicle from now on, (All it will do is level it to the ground.)
But You Can right click to re-colour said vehicle.
If your happy with the positioning, then its time to put in the rest of the scene.
Foot Note;
This will only work with items/models that have there ID Numbers entered into the rtr_useanglexz.
PS.
PPS.
PSS. or what ever,
No animals persons or vehicles were injured or damaged in the makeing of this web page.
The Fire & Police Services were on standby as this was a very dangerous scene to setup.
News Flash
